ProPOXY MoistureBLOK (MB)
ProPoxy MoistureBLOK (MB) is a clear two component, low odor, 100% solids membrane-forming, moisture vapor control system for on or below grade concrete slabs. This uniquely formulated hybrid epoxy has been specially designed for faster cure and maximum moisture vapor protection while reducing the risk of outgassing and “fish eyes” typically associated with porous and contaminated concrete. ProPoxy MB primer system can be used under all ProREZ seamless flooring materials. Reference technical data sheet for more information.
Typical Uses
Packaging
Storage
Materials should be stored indoors between 50°F (10°C) and 90°F (32°C).Shelf Life
One (1) year from date of manufacture.Limitations
Products Guide
Coverage Rate
A gallon of ProPoxy MB will cover in the following manner, with a standard spread rate: 10-16 mils or 100-160 s.f. per gallon. A nominal thickness of 16 mils is required for mitigating moisture vapor emissions greater than 16lbs/1000 sq. ft./24 hours or 92% internal RH.Mixing Instructions
Colors
See 'Color Guide'Disposal
Dispose in accordance with federal, state, and local regulations.Physical Characteristics
Kits
x2
x1
ProPOXY MoistureBLOK F Kit
ProPOXY MoistureBLOK F Kit includes
2 ProPOXY MoistureBLOK (MB) RESIN
1 ProPOXY MoistureBLOK (MB) F HARDENER
x1
ProPOXY MoistureBLOK S Kit
ProPOXY MoistureBLOK S Kit includes
2 ProPOXY MoistureBLOK (MB) RESIN
1 ProPOXY MoistureBLOK (MB) S-HARDENER
Products
ProPOXY MoistureBLOK (MB) RESIN
Modified Bis-A Epoxy apply at 16 mils for up to 25 lbs moisture mitigation or 98% RH. 2 parts resin to 1 part hardener. Install at 12-16 mils.
ProPOXY MoistureBLOK (MB) S-HARDENER
Use with MB Resin, lower viscosity hardener for better wetting of the substrate and 5 mins longer working time than F-Hardener. 2 parts resin to 1 part hardener.
ProPOXY MoistureBLOK (MB) F HARDENER
Use with MB Resin, 3.5 - 4 hr cure @ 70° F. 2 parts resin to 1 part hardener.