ProPOXY CR

      ProPoxy CR is a two component (2:1), high solids, novolac epoxy coating system with exceptional chemical resistance. ProPoxy CR may be installed as a stand-alone coating, slurry binder, or as a clear or pigmented topcoat system. It may be used in conjunction with fiberglass reinforcement for additional impact resistance and strength. ProPoxy CR provides broad spectrum chemical resistance in aggressive environments against acids and solvents.

      Typical Uses

      • Kitchens
      • Chemical Storage
      • Pharmaceutical Plants
      • Battery Storage
      • Metal Plating Lines
      • Secondary Containment
      • Food & Beverage Processing

      Packaging

      • 5 gallon white pail - Resin
      • 5 gallon black pail - Hardener
      • 1 gallon white pail - Resin
      • 1 gallon black pail - Hardener
      • 50 gallon drum

      Storage

      Materials should be stored indoors between 60°F (16°C) and 90°F.

      Shelf Life

      One (1) year from date of manufacture.

      Limitations

      • Best suited for application in temperatures between 60°F and 90°F.
      • Epoxy is light-sensitive to ambering over time and requires a UV stable topcoat.
      • Some light colors may require multiple coats for adequate hiding power.
      • Certain colors appear white when scratched.
      • Slight batch-to-batch color variations may occur.

      Products Guide

      ProPoxy CR ResinA well-rounded and versatile 2:1 epoxy novolac to be used as a binder, slurry, or grout/top coat. Good working viscosity for easy application, even at lower temperatures.
      ProPoxy CR S-HardenerA versatile epoxy novolac hardener balancing longer working time with a 10-hour cure (70°F) when combined with ProPoxy CR Resin.
      ProPoxy CR F-HardenerAn accelerated hardener designed for quicker turn-around and recoat with a 4-hour cure time (70°F) when combined with ProPoxy CR Resin.

      Coverage Rate

      A gallon of ProPoxy CR will cover in the following manner, with a standard spread rate: 12-20 mils or 80-133 s.f. per gallon. Application thickness may vary based on substrate condition and system type.

      Preliminary Floor Inspections

      • Concrete must be structurally sound and free of curing membrane, paint, or other sealer. Contact ProREZ technical support if you suspect prior sealing.
      • Concrete must be dry before application. Testing is recommended using ASTM F1869-11 or F2170-11 methods. Readings must be below 6lbs/1,000s.f./24hrs or 82% internal relative humidity.
      • Floor temperature and materials should be between 55°F and 90°F. Humidity must be less than 85%. Do not coat unless floor temperature is more than five degrees over the dew point.

      Mixing Instructions

      • Personal Protective Equipment (PPE) & clothing per SDS (Safety Data Sheet)
      • Jiffy® Mixer Blade (ES Model)
      • Clean Mixing Container
      • Low Speed/High Torque Power Drill
      • Shed-Resistant Roller Cover - 3/8" Nap
      • Application Squeegee
      • Mix ratio for ProPoxy CR is 2 parts Resin to 1 part Hardener by volume. Add and mix ProColor Universal Colorant thoroughly to the resin before adding the hardener. Mix thoroughly for 1-2 minutes with a Jiffler ES style mix blade. Avoid introducing air bubbles. Mix only enough material that can be applied within the pot life.

      Colors

      See 'Color Guide'

      Cleaning Guidelines and Maintenance

      Allow floor coating to cure at least 3 days before cleaning by mechanical means (e.g., sweeper, scrubber, disc machine).

      Caution

      • Avoid scratching or gouging the surface.
      • Do not drop heavy or pointed items, as this may cause chipping or concrete pop-outs.
      • Rubber tires can stain floor coatings. Use non-marking tires.
      • Rubber burns from sudden stops or starts can cause permanent marking.

      Repairs

      Repair gouges, scratches, or chip outs promptly to prevent moisture or chemical contamination.

      Disposal

      Dispose in accordance with federal, state, and local regulations.

      Physical Characteristics

      Percentage solids by weight98% ±2%, mixed
      Mix Ratio (by volume)2 parts Resin & 1 part Hardener
      Viscosity at 70°F600 cps
      Pot life at 70°F25 minutes
      15 minutes
      Cure Time, Tack-Free at 70°F10-12 hours foot traffic
      4-5 hours foot traffic, 18-24 hours for normal operation
      Working Time at 70°F25 minutes
      15 minutes
      Recoat WindowMaximum of 36 hours
      Coverage Rate16 mils, 100 sq ft/US gallon
      Volatile Organic Compound (VOC)nil

      Kits

      Image of 5-GAL-PAIL
      x2
      Image of 5-GAL-PAIL
      x1

      ProPOXY CR F Kit

      ProPOXY CR F Kit includes

      2 ProPOXY CR Resin

      1 ProPOXY CR F-Hardener

      Available In

      3 Gallon Kit 15 Gallon Kit 150 Gallon Kit
      Image of 5-GAL-PAIL
      x2
      Image of 5-GAL-PAIL
      x1

      ProPOXY CR S Kit

      ProPOXY CR S Kit includes

      2 ProPOXY CR Resin

      1 ProPOXY CR S-Hardener

      Available In

      3 Gallon Kit 15 Gallon Kit 150 Gallon Kit

      Products

      Image of 1-GAL-PAIL
      Image of 5-GAL-PAIL
      Image of 50-GAL-DRUM

      ProPOXY CR S-Hardener

      Low viscosity Novolac hardener for use with ProPoxy CR Resin. Cures in 12 hrs @ 70°F. 2 parts resin to 1 part hardener.

      1 Gal Pail 5 Gal Pail 50 Gal Drum
      Image of 1-GAL-PAIL
      Image of 5-GAL-PAIL

      ProPOXY CR F-Hardener

      faster setting, low viscosity Novolac epoxy hardener to be used with ProPoxy CR Resin. Cures in 6 hrs @ 70°F. 2 parts resin to 1 part hardener.

      1 Gal Pail 5 Gal Pail 50 Gal Drum
      Image of 1-GAL-PAIL
      Image of 5-GAL-PAIL

      ProPOXY CR Resin

      Versatile, chemical resistant Novolac epoxy resin to be used as a binder, slurry, or grout/ top coat with ProPoxy CR S- or F-Hardener. 2 parts resin to 1 part hardener.

      1 Gal Pail 5 Gal Pail 50 Gal Drum
Scroll to top