ProKRETE TF

    A 3-component cementitious urethane “matte finish” grout/top coat for use with all ProKrete and KreteFill systems. Use 1 bag of aggregate with HD/RT liquids for 125 sq ft per kit over 30/40 mesh sand or 2 bags of aggregate with SL liquids for 250 sq ft per kit.

    Typical Uses

    • Food & Beverage Processing
    • Pharmaceutical Plants
    • Commercial Kitchens
    • Mechanical Rooms
    • Engineering M/C Shops
    • Manufacturing
    • Loading Docks
    • Hot/Cold Wash Areas
    • Chemical Processing
    • Chilling/Refrigeration Areas

    Packaging

    Pre-measured kits: 1 unit of resin, 1 unit of hardener, and a blended aggregate bag.

    Storage

    Materials should be stored indoors between 65°F (18°C) and 90°F (32°C).

    Shelf Life

    • Unopened containers - 1 year from date of manufacture.
    • Cement-based aggregates should be stored in a dry environment for maximum shelf life.

    Limitations

    • Best suited for application in temperatures between 50°F and 90°F, but can be applied as low as 36°F.
    • Not UV stable; grey colors are most susceptible to ambering.

    Preliminary Floor Inspections

    • Concrete must be structurally sound and free of curing membranes, paint, or other sealers.
    • ProKrete is resistant to moisture vapor emission and tolerates up to 25 lbs./1,000 sq. ft./24 hours per ASTM F-1869 or 99% relative humidity per ASTM F-2170.
    • Floor temperature and materials should be between 65°F (18°C) and 90°F (32°C). Humidity must be less than 95%. Do not coat unless floor temperature is more than five degrees above the dew point.

    Mixing Instructions

    • PPE per SDS
    • Jiffy Mixer Blade (ES Model)
    • Clean Mixing Container
    • Low-Speed/High Torque Power Drill
    • Shed-Resistant Roller Cover (3/8" Nap)
    • Application Squeegee, Cam Rake, or Screed Box
    • Loop Roller (up to 1/8" SL, greater than 1/8" use plastic spiked roller)
    • 1 unit of resin, 1 unit of hardener, and 1 blended aggregate bag. Add ProColor pigment as needed.

    Colors

    See 'Color Guide'

    Cleaning Guidelines and Maintenance

    Caution

    • Avoid scratching or gouging the surface.
    • Do not drop heavy or pointed items on the floor.
    • Rubber tires may stain the floor due to plasticizer migration.
    • Rubber burns from quick stops can permanently mark the surface.

    Repairs

    Repair gouges, scratches, or chip-outs as soon as possible to prevent contamination.

    Disposal

    Dispose in accordance with federal, state, and local regulations.

    Physical Characteristics

    Mix Ratio1 unit of resin, 1 unit of hardener, 1 blended aggregate bag.
    Pot Life20 minutes at 70°F.
    Cure Time (Tack-Free)10 hours
    8 hours
    Working Time20 minutes
    25 minutes
    VOCnil
    Hardness (Shore D)80
    Adhesion>400 psi, substrate fails
    Impact Resistance>160 in/lb
    Water Absorption<0.1%
    FlammabilityClass 1
    Abrasion Resistance50 mg loss
    30 mg loss
    Coefficient of Friction0.9 (smooth)
    0.9 (HD); 0.7 (SL)
    Thermal Cycling40 cycles – no effect
    Mortar Mix Tests9,000 psi (HD); 9,500 psi (SL)
    1,000 psi (HD); 1,500 psi (SL)
    3,500 psi (HD); 2,200 psi (SL)

    Kits

    ProKRETE TF Kit Large (Std. Natural Color)

    ProKRETE TF Kit Large (Std. Natural Color) Kit

    ProKRETE TF Kit Large (Std. Natural Color) Kit includes

    1 ProKRETE SL Resin

    1 ProKRETE SL Hardener

    2 ProKRETE TF Aggregate

    Available In

    Gallon Kit
    ProKRETE TF/HD Kit Standard Size

    ProKRETE TF/HD Kit Standard Size Kit

    ProKRETE TF/HD Kit Standard Size Kit includes

    1 ProKRETE HD Resin

    1 ProKRETE HD Hardener

    1 ProKRETE TF Aggregate

    Available In

    Gallon Kit
    ProKRETE TF/RT Kit Standard Size

    ProKRETE TF/RT Kit Standard Size Kit

    ProKRETE TF/RT Kit Standard Size Kit includes

    1 ProKRETE RT Resin

    1 ProKRETE RT Hardener

    1 ProKRETE TF Aggregate

    Available In

    Gallon Kit
Scroll to top